Limit Regimes of Braking of Disc-Type Composite Flywheels Made by Filament Winding

A set of invariants describing the limit regimes of braking disk-type wound composite flywheels is suggested. The limit regime is determined by using a linear failure criterion. It is shown that, for generating short-time impulses of very high power, a set of small identical flywheels is more effective than one large flywheel with an equivalent mass. Particular examples illustrating the theory considered are discussed.     

Indentation responses of piezoelectric films

Frictionless indentation responses of transversely isotropic piezoelectric film/rigid substrate systems under circular cylindrical indenter (i.e., punch), conical indenter (i.e., cone), and spherical indenter (i.e., sphere) are investigated. Both insulating and conducting indenters are considered. The technique of Hankel transformation is employed to derive the corresponding dual integral equations for the mixed boundary value indentation problems. For the two limiting cases of infinitely thick and infinitely thin piezoelectric films, closed-form solutions are obtained. For piezoelectric films of finite thickness, a numerical method is constructed to solve the dual integral equations and semi-empirical models having only two unknown parameters are proposed for the responses of indentation force, electric charge and electric potential, and contact radius. With the two parameters inferred from the numerical results, the semi-empirical formulae are found to provide good estimates of the indentation responses for the two limiting cases of infinitely thick and thin piezoelectric films, as well as those in between. The inferred parameters in the proposed semi-empirical formulae for normalized indentation force and electric charge are checked against four different piezoelectric materials and are found to be insensitive to the selection of piezoelectric materials. It is believed that the proposed semi-empirical indentation formulae are useful in developing experimental indentation techniques to extract the material properties of piezoelectric films.     

第二类变型Bessel函数的Chebyshev逼近

第二类变型Bessel函数Kn(z)在自变量趋于无穷时就是指数变小的，使用多项式逼近的方法求解往往误差很大．采用指数变换和J．P．Boyd的有理Chebyshev多项式计算第二类变型Bessel函数，得到了令人满意的在较大范围内有效的解．     

Mesh-Independent Modeling and Moiré Interferometry Studies of Damage Accumulation in Open-Hole Composite Laminates

Mechanics of Composite Materials - A three-dimensional ply-level modeling of multiple matrix cracking near an open hole in a quasi-isotropic composite laminate was performed. A mesh-independent...     

Bounds for non‐periodic mixtures of infinitely many materials

We prove bounds on the homogenized coefficients for general non‐periodic mixtures of an arbitrary number of isotropic materials, in the heat conduction framework. The component materials and their proportions are given through the Young measure associated to the sequence of coefficient functions. Upper and lower bounds inequalities are deduced in terms of algebraic relations between this Young measure and the eigenvalues of the H‐limit matrix. The proofs employ arguments of compensated compactness and fine properties of Young measures. When restricted to the periodic case, we recover known bounds. Copyright © 2005 John Wiley & Sons, Ltd.     

Numerical analysis of a model of cure process for composites

We consider a composite material composed of fibres included in a resin which becomes solid when it is heated up (reaction of reticulation). The mathematical modelling of the cure process is given by a kinetic equation describing the evolution of the reaction of reticulation coupled with the heat equation. In this paper, we are interested in the computation of approximate solutions. We propose a family of discretized problems depending on two parameters (β₁, β₂) ε [0, 1]² which split the linear and non‐ linear terms in implicit and explicit parts. We prove the stability and convergence of the discretization for any (β₁, β₂) ε [½, 1 ] × [0, 1]. We present also some numerical results. Copyright © 2006 John Wiley & Sons, Ltd.     

The shear modulus in the fiber direction of unidirectional fiber composites based on the concept of mesophase

A new and accurate relationship for the shear modulus in the fiber direction of unidirectional fiber composites is derived, based on the Kerner model concepts but not using its approximate relationships. Furthermore, this model is extended by taking into account the mesophase between the fiber and the matrix accomodating smoothly the mechanical properties between neighbouring phases. The introduction of the mesophase results in an improvement of the theoretical predictions, which now approach close to experimental values for the moduli of different fibrous composites.     

Rational approximation in the complex plane using a τ-method and computer algebra

Numerous versions of the Lanczos τ-methods have been extensively used to produce polynomial approximations for functions verifying a linear differential equation with polynomial coefficients. In the case of an initial-value problem, an adapted τ-method based on Chebyshev series and the use of symbolic computation lead to a rational approximation of the solution on a region of the complex plane. Numerical examples show that the simplicity of the method does not prevent a high accuracy of results. This revised version was published online in June 2006 with corrections to the Cover Date.     

Micromechanics of ferroelectric polymer-based electrostrictive composites

Electrostriction refers to the strain induced in a dielectric by electric polarization, which is usually very small for practical application. In this paper, we present a micromechanical analysis on the effective electrostriction of a ferroelectric polyvinylidene fluoride trifluoroethylene [P(VDF-TrFE)] polymer-based composite, where the exact connections between the effective electrostrictive coefficients and effective elastic moduli are established, and numerical algorithm for the prediction of the effective electrostrictive coefficients of the composite in terms of its microstructural information is developed. From our calculations, enhanced electrostriction in the composite has been demonstrated, and optimal microstructure for electrostriction enhancement has been identified. Our analysis provides a mechanism for the electrostriction enhancement, where the electrostrictive strain several times higher than that of polymer matrix can be obtained, if the microstructure of the composites can be carefully tailored.     

THE STEP-TRANSITION OPERATORS FOR MULTI-STEP METHODS OF ODE'S

1.'IntroductionThedisad~ageofsymplecticmethodsinusingtheinformationfrompasttimestepsleadstotheirneedingmorefunctionevaluationthannonsymplecticmethods.Thisdisadvantagecanbeovercomeifonecouldconstructsymplecticmulti-stepmethods.But'theaestProblemshouldbesolvedistogiveoutthedefinitionofsymplecticmultistepmethod.Ulltilnow,apopularideaisthatanm-stepmethodonMmaybewrittenasaone-stepmethodonMa.Inpaper12,71,theauthorshaveinvestigatedthecircumstanceunderWhichadifferenceschemecanpreservetheproductsympl…